Spécialiste Trans Canada Énergie. Pour tout vos besoins de piles, batteries, énergie solaire ou éolienne et plus.    

 

 Le vrai spécialiste en vente et installation d'énergie alternatives.

         Tel: (514) 453- 7999          Email: info@batteriesexpert.ca   

 

 

 

 

  Centre de téléchargement / download center

Vente en gros et au détail. Vous trouverez ici toutes les piles et batteries inimaginables.

Avez-vous vu notre section énergie alternative?. Besoin d une pile passez a la section piles il y en a pour tout..

RV-750

SYSTEM OVERVIEW
System overview:
Inverter / charger system for RV applications with automatic transfer switching between DC and AC modes. Tested to UL
Voltage compatibility:
12V DC / 120V AC
Frequency compatibility:
60 Hz
OUTPUT
Output watt capacity (watts):
INVERTER MODE - 750 watts continuous, Double Boost™ rated to 1500 watts peak (up to 10 seconds). Overpower™ rating supports overloads to 1125 watts for up to 15 seconds prior to inverter shutoff. AC / CHARGER MODE - 750 watts continuous.
Output nominal voltage:
AC OUTPUT: 120V AC nominal, DC CHARGER OUTPUT (DC): 12V DC nominal (see manual for detailed information on adjustable charger settings for wet/gel battery types)
Output voltage regulation:
LINE POWER (AC): Maintains 120V nominal sine wave output from line power source. INVERTER POWER (AC): Maintains PWM sine wave output voltage of 120 V AC (+/-5%).
Output frequency regulation:
60 Hz (+/- 0.3 Hz)
Outlet quantity / type:
Hardwire AC output
Overload protection:
Includes 10A input breaker dedicated to the charging system
INPUT
Maximum input amps / watts:
DC INPUT: Full continuous load - 72A at 12V DC. AC INPUT: 29 amps at 120V AC with full inverter and charger load (9.3A max charger-only / combined input load to support charger and AC output is automatically controllable to 66%-33%-0% based on AC output loading using the charger limiting set points - see manual for setting instructions)
Input connection type:
DC INPUT: Set of 2 DC bolt-down terminals. AC INPUT: hardwire
Input cord length:
DC INPUT: User supplies cabling. 6 gauge or larger (see manual). AC INPUT: hardwire
Recommended electrical service:
DC INPUT: Requires 12V DC input source capable of delivering 73A for the required duration (when used at full continuous capacity - DC requirements increase during OverPower™ and DoubleBoost™ operation). For automotive applications, professional hardwire installation with 125A minimum battery system fusing is recommended. AC INPUT: 120V AC
BATTERY
DC system voltage:
DC input operating range 10-15V DC.
Battery recharge rate:
3 stage, selectable 11/45 amp battery charger with adjustable settings for wet/gel battery types (see manual for more charger information)
Expandable battery runtime:
Runtime is expandable with any number of user supplied wet or gel type batteries
LEDS ALARMS & SWITCHES
Front panel LEDs:
Set of 6 LEDs offer continuous status information on load percentage (6 levels reported) and battery charge level (7 levels reported). See manual for sequences.
Switches:
3-position on/off/remote switch enables simple on/off power control plus auto/remote setting that enables distant on/off control of the inverter system when used in conjunction with APSRM4 accessory (sold separately) in inverter mode. In AC uninterruptible power mode, auto/remote setting enables automatic transfer from line power to battery power, maintaining continuous AC power to connected loads.
SURGE / NOISE SUPPRESSION
AC surge suppression:
450 joules AC surge suppression included
PHYSICAL
Shipping weight (lbs):
18
Shipping weight (kg):
8.2
Unit weight (lbs):
16
Unit weight (kg):
7.3
Unit Dimensions (HWD/in):
7 x 8.75 x 9
Unit Dimensions (HWD/cm):
17.8 x 22.2 x 22.9
Shipping Dimensions (HWD/in):
12.5 x 11 x 10.75
Shipping Dimensions (HWD/cm):
31.8 x 27.9 x 27.3
Material of construction:
Polycarbonate
Form factors supported:
Mounting slots enable permanent placement of inverter on any horizontal surface (see manual for additional mounting information)
Cooling method:
Multi-speed fan
ENVIRONMENTAL
Operating Temperature:
32-104 Fahrenheit / 0-40 Celcius
Relative Humidity:
0-95% non-condensing
LINE / BATTERY TRANSFER
Transfer time from line power to battery mode:
16.6 milliseconds (typical - compatible with many computers - verify transfer time compatibility of loads for UPS applications)
Low voltage transfer to battery power:
In AC "auto" mode, inverter/charger switches to battery mode as line voltage drops to 75V (user adjustable to 85, 95, 105V - see manual)
High voltage transfer to battery power:
In AC "auto" mode, inverter/charger switches to battery mode as line voltage increases to 145V
CERTIFICATIONS
Certifications:
Tested to UL458 (USA) and CSA (Canada)
WARRANTY
Product warranty:
30 months (Outside the U.S. and Canada, call for warranty information)
SPECIAL FEATURES
Appearance:
Attractive gray color scheme
Load Sensing:
Optional load sense function enables automatic inverter shutoff and startup as connected equipment is powered off and on. Front panel load sense potentiometer can be set to shutoff or turn on inverter power in response to loads of any level, up to 150 watts.
BATTERY PACK ACCESSORY (optional)
Battery Pack Accessory (optional):
98-121 sealed lead acid battery (optional)